providing a Range of ROV Services

About SeaVeyors

 dive-01-715-300

Business Concept

SeaVeyors Environmental and Marine Services Limited was incorporated in 2006 by Ken Wing, a commercial fisherman and Darren Horler, a commercial diver.

Ken’s contract with the Herring Conservation Society to conduct herring dive spawn surveys was the catalyst that led to discussions of future business possibilities. It became apparent that by combining their individual resources and skillsets, Ken and Darren could form an ROV and Diving company that would serve the needs of the marine industry.

Please contact us to assist with any of the following services.

We are available to work anywhere that our services are needed, with Vancouver Island, the Sunshine Coast and Coastal British Columbia as our home region.

Our services include:

 

Aquaculture Surveys Reservoir & Dam Inspections
Search & Recovery Spawn Monitoring
Anchor & Mooring Surveys Biological Sampling
Outfall Inspection Peak BioMass Survey
Marine Accident Investigations
& Recovery
Soft Bottom Sampling

Aquaculture Surveys

Protocols for marine environmental monitoring to support the Finfish Aquaculture Waste Control Regulations were established and specified by the Ministry of Water, Land and Air Protection (WLAP) in 2002. These protocols ensure that high quality data is collected, enabling WLAP to make sound decisions as to whether environmental standards are being met.

Under the regulations, a base-line survey is required before a new aquaculture site is built. We conduct initial and follow-up ROV surveys under WLAP’s “hard bottom” protocol. We provide video surveys of “hard bottom” in accordance with the finfish aquaculture waste control regulations. We also conduct diver-assisted surveys where required. Our diving & ROV services include habitat surveys in water of all depths. Our surveys meet or exceed protocol requirements.

The WLAP ROV protocols were developed with regard to the aquaculture industry. However, these protocols may also be relevant to monitoring or assessing impacts of other anthropogenic activities:

Initial Site Survey (Baseline Survey) – in the initial stages of choosing a prospective aquaculture site or marine construction site, a baseline survey is required to determine if sensitive habitat exists in the area. The survey enables the government to determine a course of action to aid the habitat for existing species prior to the installation of the site.

Search & Recovery

We conduct marine and aquatic ROV surveys around new and existing industrial and infrastructure development for debris and lost equipment. Related problems can frequently be mitigated using the capabilities of our ROV.

When searching for lost objects like air planes and boats, we use sounding equipment along with our ROV to locate the objects. The ROV is deployed to search the area in a pre-determined pattern and produces a visual record while recording the GPS location of the found object, which can then be used to facilitate recovery.

Anchor & Mooring Surveys

We assist with the appropriate placement of anchors and moorings. Anchors are deployed using surface indicators to guide their placement. An inspection can determine if the anchor line is touching any outcropped rocks and if the anchors are positioned as intended.

We also survey for storm or time-related dragging, wear, chafing or other damage. Detached or damaged anchors and mooring equipment may often be retrievable using ROV capabilities.

Outfall Inspection

We survey for the best placement of marine outfalls. We also survey for time or accident related damages. Outfalls require periodic inspections to ensure there is no damage to the pipe and to verify that the end of the pipe is free of debris. Outfalls also require periodic environmental impact surveys to ensure they are compliant with the protocols in place.

Marine Accident Investigations & Recovery

We assist in the investigations of insurance and liability claims related to sunken or damaged marine equipment, cargo and vessels. ROV surveys can aid planning for recovery.

Reservoir & Dam Inspections

We conduct base line surveys for new developments or expansions of existing ones.

We inspect for sedimentation and damage at operating facilities. Our ROV can be used where conventional diving is not feasible. The ROV can reach greater depth and difficult to access locations. Our clients frequently prefer to use our ROV for dam inspections as doing so may not require a 100% lockout of the facility that is often needed when a diver is involved.

In addition, we can complete and submit company checklists that include the condition of potable water tanks, ladders, hatches, access roads and the presence of biological activity such as bird nests. We report on seepage or staining around structural components and remove sediment.

Herring Spawn Monitoring

SeaVeyors has been involved with DFO herring spawn surveys since 2004 and has an extensive understanding of the survey process.

Biological Sampling

ROV technology enables us to discreetly sample benthic habitat. We can select individual specimens and precise areas of marine sediments. Live transport can be arranged.

Peak BioMass Survey

When a site is at peak biomass, the government requires a 3rd party surveyor to come in and perform a Video Survey with an ROV on a hard bottom site and a Sediment Sample Survey on a soft bottom site. Our tracking system and laser scale allows us to produce surveys that are compliant with government requirements.

FYI – When determining Peak Biomass, there are predetermined transects or lines that need to be surveyed periodically. Along these transects, there are individual stations ( 0.5m sq.) that need to be identified and measured. Our tracking system can tell us when we are in the exact place we need to be and the laser scale allows us to determine the 0.5m sq. The information from each square is recorded for comparison.

Soft Bottom Sampling

We lower a Benthic Grab to harvest samples from the bottom which can then be tested to determine content.